FEATURE NEWS:
Horizontal dry wire drawing machine for steel wires
Founded in 1973, Electrorrec S.A., Spain, specialises in the supply of machines for the steel wire industry, offering complete projects for the manufacturing of calibrated and threaded bars and coils. The company has recently introduced its new horizontal dry wire drawing machine, model MPH-1.200, capable of drawing low-carbon steel rods up to 50mm Ø to a minimum outlet diameter of 18mm, with a maximum pulling force of 250kN. The machine has been designed to feature 1,200mm Ø capstans that are horizontally mounted. The model MPH-1.200 also features a drawing draft, and the drive is achieved by AC motor with steplessly adjustable speed pre-set (frequency inverter) and speed gear box. The machine is supplied with a pair of clamp rollers hydraulically operated that can be brought down onto the surface of the wire, which grips this on the surface of the capstan. The water cooling dieholder can be pivoted on both vertical and horizontal planes, and it allows drawing with soap lubricant or lubricating oils.
The ergonomic design of the MPH-1.200 increases operator efficiency by enabling the block to be threaded in a fast and convenient manner thanks to the guiding rolls hydraulically operated. In addition, the capstan is equipped with a special pull-in dog, which runs perpendicular to the wire and allows threading the last wire wrap in parallel with the previous one. The machine can also be supplied with an automatic cleaning system pneumatically operated to remove the residual lubricant from the surface of the wire.
Company: |
Electrorrec SA |
Country: |
Spain |
Fax: |
+34 936 82 03 83 |
Email: |
|
Website: |
www.electrorrec.com |